Reinstalling The BR-1800 Printer CR Motor

1. Remove the Machine Upper covering

2. Disconnect the Printer CR Motor Connector Cable from the Relay Connector, Removing the CR Motor Connector Cable

3. Press the Driven Pulley toward the center to loosen the CR Drive Belt, and remove the CR Drive Belt from the CR Motor Pinion Gear.

4. Remove the two C.B.S. M3 x 4 screws that secure the CR Motor, and remove the CR Motor from the Main Frame.

5. Reinstalling the CR Motor, Make the Lot No. printed surface on the CR Motor face the direction shown in the figure below.