How to replace the CR Scale strip with a new one.

1. Release the Carriage lock, and move the Carriage Unit to the center, Click the cleaning button on control panel.the carriage unit will be move to the to the center.
2.  Pull the right end of the encoder strip in the direction of the arrow, and remove the encoder strip from the Tab on the Right CR Shaft Mounting Plate.
3. Draw out the right end of the CR Scale towards the left direction from the rear of the Carriage Unit.
4. Remove the coil section of Torsion Spring 24.7 from the Tab on the Left CR Shaft Mounting Plate with tweezers.

5. Turn the CR Scale 90º, and remove it from the Tab on the Left CR Shaft Mounting Plate.

6. Remove the encoder strip from the slot on the CR Encoder.
7. Pass the CR Scale through the slot on the CR Encoder.